RKENS TECHNOLOGY CO.,LTD
Quality and Service, Crafting Excellence Together!
Add to Cart
Automatic PCB lead cutter is designed to trim the extra long leads automatically and efficiently on the PCBA that components inserted and soldered. A pair of conveyor chain is equipped in the model in which clamp and deliver the PCBA to the blade turning in high speed for trimming. And warp prevention device is equipped to ensure no damage on boards.
To use the PCB lead cutter machine, your pcb should meet below requirement.
1. The pcb size should be within 400x250MM.
2. The PCB board side should have at least 2MM distance from components.
3. The shortest length machine can cut is up to 1.5MM. However if there is components on back side, lead length should be higher than components. For example, there is 3MM height components on bottom side, so after cutting, the lead length should be higher than 3MM. You can not cut lead length lower than 3.0MM.
| Name | Automatic PCB Lead Cutter, Soldered PCB Lead Wire Cutter, Lead Cutting |
| Model | RS-911A |
| Power Supply | 380V AC50HZ/60HZ |
| Shortest cut length | 1.5MM Cut length is adjustable |
| Available PCB size | Max 400x250MM |
| Blade type | 200MM Dia, And 250MM Dia for option |
| Efficiency | 4500 RPM |
1. The eagle claw shrapnel clamp can nip PC boards tightly and push them forward automatically and stably.
2. The track board-delivery speed can be adjusted according to pins to increase the service life of the cutter.
3. As the principal axis rotates quickly, the machine works accurately and efficiently.
4. The crest pinprick ball and the bakelite press plank can reduce the error of lead-cutting of PC boards transformed during the tin soldering.
5. With a photoelectric switch, it is very safe.
Pictures of Automatic PCB Lead Cutter, Soldered PCB Lead Wire Cutter, Lead Cutting
